N 333

Pneumatic riveting machine for brake linings

HIGHLIGHTS

  • Short setup time due to quick change tool mounting
  • The riveting stroke of 50 mm ensures trouble free operation even when access is difficult.

Useful for

  • Removal of the rivets of the old brake lining
  • Riveting of new brake linings

Accurate riveting of brake linings is an essential requirement for the safe operation of vehicle brakes and avoidance of a major source of brake squeal. The N 333 assures quality operation and thus a quality brake job.

  • Maximum riveting force of 50,000 N at a working pressure of 9 bar. The riveting force can be infinitely varied in accordance with the rivet diameter and read directly on the pressure gauge. This facilitates faultless results without damage in the vicinity of the rivet.
  • The riveting stroke of 50 mm ensures trouble free operation even when access is difficult. The tool speed of 1,65 m/min makes for rapid throughput.
  • Working pressure from 1-9 bar steplessly adjustable
  • Short setup time due to quick change tool mounting

For more information, please click on the respective picture.

Working data
Actuation pneumatic
Max. permissible
pressure
9 bar
Working pressure
steplessly variable
1 to 9 bar
Max. riveting force
approx. 50.000 N at 9 bar
Working stroke 50 mm
Ram speed 1,65 m/min
Air consumption
at 5 cycles/min approx.
123 ltr.
Tool mounting holes 20 mm dia.
Capacity
Max. width of brake shoe 300 mm
Max. height of web on
double web shoes
55 mm
Dimensions and weights
Bench machine
L x W x H180 x 575 x 775 mm
Space required
machine + working area
1,0 x 1,0 m
Weight machine incl. standard
accessories and packing
85 kg
Noise levelThe noise level at maximum air flow measured in accordance with standard DIN EN 31201 at a distance of 1 m from the machine surface in open space amounted to 8MB(A) at the working position.
Here comes a Footerstring