Brake drum and brake disc
turning and grinding machine
HIGHLIGHTS
- Modularer Aufbau; in 4 Ausführungen lieferbar
- Technically up-to-date through “intermittent feed”
- High load capacity of work arbor (500 kg!) due to far forward position of spindle bearing
- Kurze Werkzeughalter durch axial verschiebbaren Unterschlitten, dadurch keine Vibrationen
APPLICATIONS
- Turning of brake drums of trucks, trailers and buses (with and without wheels)
- Grinding of brake drums of trucks, trailers and buses
- Turning of brake discs (preferably with hub) of trucks, trailers and buses (B 355a)
- Turning of brake discs of industrial trucks, vans and cars
- Turning of brake discs of industrial trucks, vans and cars (B 355a)
- Turning and grinding of flywheels of trucks and buses (B 355a)
- Turning and grinding of flywheels of industrial trucks, vans and cars (B 355a)
Professional machine for commercial vehicle workshops performing brake repair work
- Due to its modular design 4 model versions are available:
- B 355t/1 – 3 spindle speeds: 33/60/100 rpm
- B 355t/2 – steplessly variable variator drive: 20 – 120 rpm
- B 355a/1 – 3 spindle speeds and transverse drive
- B 355a/2 – steplessly variable variator drive and transverse drive
- High load capacity of work arbor (500 kg!) due to far forward position of spindle bearing
- Axially adjustable lower slide for the use of short and solid tool holders
- Tool feed by electronically controlled DC motors. The feed in both directions is infinitely variable and “intermittent”
- LCD position display for quick drum diameter and spindle setting (optional)
- Simultaneous turning and grinding of brake drums. Saves time and gives perfect surface finish.
- Precision turning of both sides of brake discs in one operation (B 355a)
- The powerful and effective dust and chip extraction provides a healthy and clean workstation
| Capacity | |
| Max. wheel-Ø | 1400 mm |
| Max. turning- and grinding-Ø | 600 mm |
| Min. turning-Ø | 150 mm |
| Min. grinding-Ø with the double mounting | 285 mm |
| Kleinster Schleif-Ø mit dem Lagerbock | 260 mm |
| Max. turning and grinding depth | 280 mm |
| Max. brake disc Ø | 440 mm |
| Max. brake disc thickness | 60 mm |
| Max. radial width of machined brake disc surface | 130 mm |
| Max. Ø of flywheel | 600 mm |
| Min. Ø of flywheel | 300 mm |
| Slide travel parallel to spindle | 290 mm |
| Slide travel at right angles to spindle | 105 mm |
| Adjustment of base slide | 150 mm |
| Spindle speeds and feeds | |
| Rotational spindle speed | B 355t/1 - B 355a/1 33/60/110 rpm B 355t/2 - B 355a/2 variable 20-125 rpm |
| Grinding spindle speed | 4500 rpm |
| Intermittent feed forward and reverse continuously variable | 0 - 0,40 mm/rev. |
| Electrical equipment | |
| Connected load | 2,2 kW |
| Voltage | 400/230 V |
| Type of current | Three-phase current |
| Frequency | 50 Hz |
| Power supply fuse rating | 16 A |
| Type of enclosure | IP 54 |
| Power of individual motors | |
| Main spindle motor | 1,1 kW |
| Grinding spindle motor | 1,1 kW |
| Dimensions and weight | |
| L x W x H (including guard) | 2,0 x 2,0 x 2,1 m |
| Space required by machine and working area | 3,0 x 3,0 m |
| Main spindle axle from bottom | 1115 mm |
| Weight machine including standard accessories and packing | approx. 430 kg |
| Dust extraction | |
| Min. volumetric flow rate | 170 cbm/h |
| Suction hose ⌀ | 32 mm |
| Special accessories | |
| Swiveling jib crane height | 3 m |
| Jib length | 2 m |
| Bearing capacity | 5000 N |
| Lifting gear bearing capacity | 5000 N |
| Noise emission | The workplace-related emission level, measured in accordance with DIN EN 31201 at a distance of one meter from the machine surface under free-field conditions and at the maximum volumetric flow rate, was 84 dB(A) under full-load operation. |
